Punch 300 Watt 2-Channel Amplifier

P300X2

The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.

The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.

FEATURES AT A GLANCE

  • 12dB/octave Butterworth crossover
  • Features C.L.E.A.N. Set-up
  • High level input capable with Auto Turn-On circuit
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • RCA pass-thru outputs
  • Short circuit protection
  • Over current protection
  • Cast aluminum heatsink
  • Muted turn on
  • 1 Year Warranty
  • Stealth top mounted control panel


SPECIFICATIONS

Cta-2006 Compliant Remote Controls Optional Punch Level Control (PLC2) Ready
Number of Channels 2 Visual Indicators Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3

LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Total Power
(Sum of Rated Power)
300 Watts Power Wire Gauge 8 AWG to 4 AWG
Rated Power
(RMS Continuous Power)
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
Power Input Connector Captive C-Clamp
Dynamic Power
(PVC/PowerCube®)
122 Watts x 2 @ 4-Ohms 0° Res
215 Watts x 2 @ 2-Ohms 0° Res
435 Watts x 1 @ 4-Ohms Bridged 0° Res
Speaker Wire Gauge 8 AWG to 18 AWG
Bridgeable Yes Speaker Output Connector Captive C-Clamp
Frequency Response 20Hz-20kHz Cooling Convection
Input Sensitivity 150 mV - 12 V Heatsink
Circuit Topology Class Class A/B Operating Voltage 9 - 16 VDC
Efficiency (average) 69% @ 4-Ohm Recommended Fuse
(not included)
50 A
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Average Current Draw (13.8V Music) 23 A
Signal Input Hi/Low Level: 1 RCA Pair Max. Current Draw (13.8V Sinewave) 45 A
Signal Output Low Level: 1 RCA Pair Suggested Alternator 75 A
Tone Controls 0dB to +14dB @ 12.5kHz
0dB to +18dB @ 45Hz
Dimensions (H x W x D)
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
Crossover Controls High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Shipping Weight
9.5 Lbs. (4.3 Kg.)

Works Great With

    Complementary products