-
files/4490886865.webp
-
files/4490882722.jpg
Maestro
HRN-HRR-CH3
- Regular price
- $99.99
- Regular price
- $99.99
HRN-RR-CH3
Plug and Play T-Harness for CH3 Chrysler, Dodge, Jeep Vehicles
- Connect an iDatalink-compatible car stereo and retain steering wheel controls and factory amp in select Chrysler-made vehicles
- Allows installation of a new receiver with iDatalink port in select Chrysler vehicles (also requires the Maestro ADS-MRR module)
- Retains the use of your steering wheel audio controls and factory amp
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
The HRN-RR-CH3 wiring adapter is a must-have for select 2007-up Chrysler vehicle owners who want to connect an iDatalink-ready car stereo. This adapter works with iDatalink's Maestro ADS-MRR or ADS-MRR2 module to retain the use of your steering wheel audio controls, factory amp, warning chimes, and retained accessory power.
Compatible radios from Alpine, JVC, Kenwood, Pioneer, and Sony you'll be able to retain the use of these factory features:
- touchscreen control of climate control and vehicle settings
- steering wheel controls
- use of the factory amplifier, including turn-on, fader, gain, and speed-compensated volume
- rear-view and other cameras, depending upon aftermarket radio inputs
- secondary vehicle display (when equipped)
- rear-seat video and control (when equipped)
The harness also supplies the outputs (parking brake, reverse, and VSS [Vehicle Speed Sense]) necessary for installation of a NAV receiver, plus illumination and accessory power outputs.
Extra features with an iDatalink-ready car stereo
If you're buying a compatible iDatalink-ready car stereo, you'll be able to display vehicle info on your receiver's screen, plus read and reset engine codes.
Installation note: The HRN-HRR-CH3 adapter must be used with the iDatalink Maestro ADS-MRR or ADS-MRR2 module to connect a new iDatalink-compatible car stereo to your Chrysler-made vehicle.
The package includes connectors that plug in between the Maestro module, your factory radio's wiring plugs, and the serial port on your new car stereo. You'll need to solder or splice together this harness's power/ground, illumination, speaker, and navigation output wires to the corresponding wires on your aftermarket receiver's wiring harness.
Installation note: The HRN-RR-CH3 adapter must be used with the iDatalink Maestro ADS-MRR or ADS-MRR2 module to connect a new iDatalink-compatible car stereo to your Chrysler-made vehicle.
In the Box:
- iDatalink HRN-HRR-CH3 Vehicle-specific Harness owner's manual
- Vehicle/radio harness
- OBDII connector harness
- OBDII junction harness
