Power 500 Watt Class-bd Constant Power Amplifier

T500-1bdCP

The Power T500-1bdCP is a 500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T500-1bdCP is optimized exclusively for use with subwoofers.

The T500-1bdCP is based on the legendary T500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. With the T500-1bdCP, you can now use an "under-the-seat" dedicated subwoofer amplifier to drive two 4-Ohm DVC subwoofers. This amp will provide enough bass to separate you from those envious car audio geeks.


FEATURES AT A GLANCE

  • MOSFET output stage
  • Audiophile grade speaker connections
  • 24dB/octave crossover
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • RCA pass-thru outputs
  • Infrasonic filter
  • 2-Year Warranty

SPECIFICATIONS

Cta-2006 Compliant Remote Controls Optional Remote Punch Bass EQ
(overrides built-in Punch Bass EQ)
Number of Channels 1 Visual Indicators Power
Thermal
Protect
Total Power
(Sum of Rated Power)
500 Watts RMS Power Wire Gauge 4 AWG
Rated Power
(RMS Continuous Power)
300 Watts x 1 @ 4-Ohm
500 Watts x 1 @ 2-Ohm
500 Watts x 1 @ 1-Ohm
Power Input Connector Block
Dynamic Power
(PVC/PowerCube®)
328 Watts x 1 @ 4-Ohms
537 Watts x 1 @ 2-Ohms
707 Watts x 1 @ 1-Ohm
Speaker Wire Gauge 8 AWG to 18 AWG
Bridgeable No Speaker Output Connector Screw terminal barrier strip
Frequency Response 20Hz to 250Hz +/- 0.5dB Cooling Convection
Input Sensitivity 150 mV to 4 V
Heatsink
Circuit Topology Class Class BD Operating Voltage 9 - 16 VDC
Efficiency (average) 86.2% @ 4-Ohm
82.3% @ 2-Ohm
73.4% @ 1-Ohm
Recommended Fuse
(not included)
80 A
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Average Current Draw (13.8V Music) 35 A
Signal Input Low Level: 1 RCA pair Max. Current Draw (13.8V Sinewave) 70 A
Signal Output Low Level: 1 RCA pair Suggested Alternator 75 A
Tone Controls Bass: 0dB to +18dB @ 45Hz Dimensions (H x W x D) 2.14 x 8.14 x 11.41 (in)
5.42 x 20.68 x 28.97 (cm)
Crossover Controls Low-Pass (LP): 35-250Hz 24dB/Octave Butterworth
Infrasonic Filter: -3dB @ 28Hz 12dB/Octave
Shipping Weight 13.39 Lbs. (6.07 Kg.)

Works Great With

    Complementary products