ROCKFORD FOSGATE M5-800X4

This product is currently sold out.

800 Watt 4-Channel Element Ready™ AmplifierM5-800X4

 

The M5-800X4 amplifier features the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in. The IPX6 rating is provided by splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.

 

CEA-2006 Compliant
Yes
Number of Channels
4
Total Power
(Sum of Rated Power)
800 Watts
Rated Power
(RMS Continuous Power)
CTA-2006 GuidelinesCTA-2006 Continuous Power Rating
100 Watts x 4 @ 4Ω
100 Watts x 4 @ 2Ω
200 Watts x 2 @ 4Ω Bridged/Mono
≤1.0% THD+N
Dynamic Power
(PVC/PowerCube®)
CTA-2006 GuidelinesCTA-2006 Dynamic Power Rating
125 Watts x 4 @ 4Ω
200 Watts x 4 @ 2Ω
400 Watts x 2 @ 4Ω Bridged/Mono
Bridgeable
Yes
Frequency Response
10 Hz - 50 kHz
Input Sensitivity
150mVrms - 12Vrms
Circuit Topology Class
Class-AD
Efficiency (average)
>75%
Total Harmonic Distortion (THD+Noise)
<0.25% THD+N @ 1 Watt
Signal Input
Low-Level: 4 RCA
High-Level: (2) 4-Pin Molex
Signal Output
Tone Controls
Front/Rear: 0-14dB @ 12.5kHz
Front/Rear: 0-18dB @ 45Hz
Crossover Controls
High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

All-Pass: Yes
Remote Controls
No
Visual Indicators
Power: Blue
Protect: Red
Input Clip: Red
Output Clip: Blue/Red
Power Wire Gauge
8 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
16 AWG
Speaker Output Connector
4-Pin Molex
Cooling
Convection
Heatsink
Extruded Aluminum
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
55 A @ 4Ω
85 A @ 2Ω
90 A @ 4Ω Bridged
Suggested Alternator

Dimensional Diagram

Dimensions (H x W x D)
1.7" x 4.25" x 8.41"
(42.8 mm x 108 mm x 213 mm)
Does not include harnesses